CW-DAPLINK is an in-circuit debugging and programming tool for CW32 series MCUs.The CW-DAPLINK communicates in-circuit with the MCU of the application board through the SWD interface.Through CW-DAPLINK's full-speed USB interface, the CW32 series MCUs can communicate with the IAR™ , Keil® IDEs on the PC. ● Powering the debugger via the USB port 5V power supply ● Full-speed USB 2.0, TYPE-C connector ● USB TYPE-A to TYPE-C connection cable ● SWD interface characteristics: — Interface level 1.65V~5.5V adaptive, reference voltage output from target board — Up to 10Mbps communication rate — 6PIN PA2.0 interface to IDC2.54 interface ● Status indicator for USB communication/ debugging/ programming etc. ● Operating temperature range 0~50°C

CW-Writer is a mass-production burn-in tool for CW32 series MCUs.CW-Writer can realize offline or online program burn-in of CW32 microcontroller FLASH by using ISP protocol through the upper computer software CW-Programmer which works with it. ● The CW-Writer is connected to the PC through the USB port to achieve power supply and communication functions, when used offline, it needs to provide DC 5V/500mA or more for the programmer to use; ● The burning machine port of the CW-Writer for automated burning of the burning machine; ● The burning port of the CW-Writer for program burning of the chip; ● The start button, press it to start programming the chip; ● Power light, used to indicate that the power supply of the burner is normal, and it is red and always on; ● Failure light, always on when burning fails, color is red; ● Success light, always on when burning success, color is green; ● Programming light, always on when burning, color is orange; ● The Communication light flashes when the burner communicates with the PC, and the color is blue.